Product description
The solenoid valve blocks an inch water line by applying 230 volt operating voltage. Select option NO** for this purpose. Advantage: no power consumption under normal conditions. There is also an NC (normally closed) version: this allows the valve to let water through as long as it receives 230 Volt mains voltage. When the mains voltage fails, the water supply stops.
Applications
Control by water detector
This valve can be controlled directly with 230V, 24V or 12V by a water detector unit. In case of leakage (water on the floor), the water supply closes automatically and water damage is prevented. In combination with a water level controller, the valve can be used as a refill solenoid valve.
Specifications
- Type: Solenoid valve
- Coil: 230V - 24V - 12V
- Flow rate: < 432 l/min
- Working pressure: 0,1...10 bar
- Option: currentless open (NO) or closed (NC)
- Connection: 2” internal
- Manufacturer: Norgren
- Material: brass
- Weight: 2530 g
- Operating temperature: -10...+50 °C / Liquid temperature: -10...+90 °C
- Included: coil connector
- Earth connection: yes
- Power consumption: < 10 VA
- Safety class: IP65
- Quality mark: CE
Optional control cable - Specifications.
Control cable with IP65 connector for making waterproof electrical connection to the valve coil. Professional design with locking screw. Cable with phase, neutral and earth.
- Cable type: H05VVF
- Cable diameter: ∅ 6 mm
- Cable length: 2 m
- Core: Cu, 3 x 0.75 mm²
- Coil connector: 3-pole
- Safety class: IP65
- Hallmark: VDE
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.