Product description
This solenoid valve blocks the water line when 230 Volt operating voltage is applied. Select option NO for this purpose. Advantage: no power consumption under normal conditions. There is also an NC option (normally closed), whereby the valve allows water to pass through as long as it receives 230 Volt mains voltage. If the mains voltage is lost, the water supply is automatically blocked.
Applications
Control by water detector
This 230 Volt valve can be controlled directly by a
water detector unit. In case of leakage (water on the floor), the water supply will automatically stop and water damage will be prevented. This valve can also be used as a refill solenoid valve, in combination with a
water level controller.
Connection options
This valve has a 3/4 inch female thread. You can also order it with 2 brass reducer nipples (see photo) from 3/4” to 15 mm compression fitting.
Specifications
- Type: solenoid valve
- Coil: 230V - 24V - 12V
- Flow rate: < 90 l/min
- Working pressure: 0,35...12 bar
- Option: currentless open or closed
- Connection: 3/4” internal
- Manufacturer: M&M
- Material: brass
- Weight: 710 g
- Temperature: -10...+90 °C
- Included: flush connector
- Earth connection: yes
- Power consumption: < 10 VA
- Safety class: IP65
- Hallmark: CE
Specifications
Control power cable with IP65 connector for making waterproof electrical connection to the valve coil. Professional design with locking screw. Cable with phase, neutral and earth.
- Cable type: H05VVF
- Cable diameter: ∅ 6 mm
- Cable length: 2 m
- Core: Cu, 3 x 0.75 mm²
- Coil connector: 3-pole
- Safety class: IP65
- Hallmark: VDE
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.