Product description
Water detection sensor with built-in electronics. Resistant to flooding. Alarm contact can be directly connected to a
GSM detector,
water detector or BMS/alarm system.
Applications
Works on DC and AC
This detector operates at 24 volts and is suitable for both AC and DC voltage. This universal water detector has a single pole break contact. If it detects water, the red LED lights up and the relay contact drops.
Protected against voltage drop
In the idle state (with power connected), the green LED illuminates and the relay contact is energized. Tamper-proof: The alarm contact closes even if the connection cable is interrupted and the power supply is lost.
Compact waterproof housing
The floor sensor is encased in a waterproof IP68 housing with 4 metal detector pins at the bottom.
Specifications
- Type: active water sensor/detector
- Principle: point detection-conduction
- Voltage: 24V ac/dc
- NO contact: < 60 V / 1 A
- Current consumption: < 40 mA
- Sensor: 4 sensing contacts
- Sensitivity: 1.25...1.00 μS
- Detection height: > 0.5 mm
- Indicator lights: 2x LED
- Sensor block material: ABS
- Dimensions: 46x34x28 mm
- Sensor block weight: 130 g
- Connection wires: 4x 0.14 mm²
- Cable: Ø 3.7 mm, length 4 m
- Operating range: 0...+60 °C
- Safety class: IP68
- Hallmark: CE
Connections water detector 24V
The 4-wire connection cable is 4 m long. It may be shortened or extended (if required). The connection for the power supply is not polarity sensitive.
White = supply voltage
Brown = supply voltage
Green = NC contact
Yellow = NC contact
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.