Product description
This water detector has an external sensor and simply fits into the wall socket. An optional plug-in alarm is available (see image). In the event of a leak or water alarm, the detector can also switch on or off a device. With a button on the side of this water detector you can easily set that.
Applications
Socket water detector: many functions
ENABLE: in case of water leakage (sensor wet) it automatically powers a 230V pump. It can also control an electric pipe valve. Tip: order it with flush option Send cable, to plug into the socket water detector. An alarm in another room can be realized with a 230V flash lamp or alarm horn. When the sensor detects water, mains voltage is applied to the output and the green LED lights up.
SWITCH OFF: With this function, a washing machine or electric water heater no longer receives voltage (green LED goes out) when there is water on the floor. A connected 230V appliance can thus be switched off automatically in case of leakage.
Indicator lights and alarm tone
In the event of a water alarm, the red LED flashes and a sharp alarm tone sounds. The volume is adjustable in 3 steps and this audible alarm does not stop until you press the Reset button.
Placement in the socket
The socket water detector requires no installation work: simply place it between the socket and the power cord of the device to be switched. If the green LED lights up, it means that mains voltage is being transmitted. This multifunctional water detector is equipped with protective earth.
Water sensor with 2 m cable
The water sensor is permanently connected to the alarm unit with a flexible cord of 2 meters. You place the sensor on the floor (leakage) or the place (level) where you want to detect water. Included is a plug with screw to fix the sensor against a wall or skirting board. This may be done horizontally or vertically. Functional testing: use a knife or other metal object against the contacts of the sensor to check whether the socket water detector switches correctly.
Specifications
- Power supply: 230 Volt (mains)
- Power consumption: 0.4 W
- Switching power: 1.800 Watt
- Functions: switching on/off
- Operating range: +4...+50 °C
- Acoustic alarm: 85 dB / 3 m
- Sound: adjustable in 3 steps
- Indicator lights: 2x LED
- Dimensions: 106x55x35 mm
- Weight: 225 grams
- Reset button: yes
- Water sensor: 2 m cable
- Sensor: hor/ver, mounting hole
- Manual: NL, Ger, Eng, Fr
- Safety class: IP20
- Manufacturer: Germany
- Hallmark: CE
Option: Acoustic plug-in alarm 230V
Compact siren with mains plug: see picture. This signal generator produces a loud screeching sound + a flashing light signal. The plug-in alarm fits into outlets with or without a protective earth. It is not suitable for damp rooms.
Plug-in alarm - specifications
- Supply voltage: 230 Volts
- Current consumption: 200 mA
- Sound pressure: 90 dB
- Safety class: IP20
- Connection terminals: no
- Operating range: -20...+50°C
- Mounting height: 55 mm
- Diameter: Ø 78 mm
- Manual: D, NL
- Weight: 70 g
- Hallmark: CE
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.