Product description
Programmable swimming pool level control with 230 volt output. Choice of various water sensors, or a plastic float with 10 meter connection cable.
It makes no difference to the sensor whether the water basin is made of metal, plastic or concrete. Examples: swimming pool, well, cellar, pond, aquarium, tank, rainwater storage.
Applications
Level control with one sensor
Thanks to smart electronics, this control only requires one sensor. On the front panel of the swimming pool level controller there is a screw plug for easy connection of the matching 2-wire water sensor or float. See selection bar Sensor version.
After detecting water by the float/sensor, a message follows and 230 Volt mains voltage becomes available on the built-in socket. You can connect a pump or solenoid valve to this.
Level control with many functions
- For filling and emptying
- Level and/or time controlled
- Water sensor or float switch
- Switching on or off 230 Volt
- Menu-driven swimming pool control
Using the selection menu, you enter four parameters to fully adapt the control to your requirements.
FUNC: value 1 = switch-on delay | value 2 = switch-off delay.
SEnS: the sensitivity of the water sensor, prevents too slow or too fast reaction.
dEL: switch-on time/switching delay, adjustable in steps, from 1 sec to 2.8 hours.
rEL: switching function of the output, 230 Volt ON or OFF (for switching on or off).
Simple status check with lights
LED green: the sensor detects water
LED red: programming mode (menu)
LED yellow: relay is switched on
Setting is easy using 2 push buttons for increasing and decreasing the relevant parameter. This is what you do for each of the four steps.
Tip: try the menu functions first to familiarise yourself with the control before installing it. You can easily test the response of the control to a wet sensor with a saucer of water.
Output for 230V mains voltage
The built-in, earthed socket can control a pump or water valve or an alarm signal. This level control is universal and can be used for both topping up and emptying. Also for applications other than swimming pools.
Thanks to the setting options, you can adapt it to your specific application. For example, preventing false alarms and protection against a pump running dry.
Specifications
- Connection voltage: 230 Volt
- Connection power: 2,500 W
- Own consumption: 3.5 W
- Operation: 3 push buttons
- Indicator lights: 3x LED
- Display: LED red/ 12.7 mm
- Internal acoustic alarm: no
- Power cord: approx. 1.6 m long
- Plug: edge & pin earth
- Socket: edge earth
- Switch-on time: 1...9999 sec
- Switch-off time: 1...9999 sec
- Sensor: 2 electrodes 25 mm *)
- Input: 2-wire screw terminal
- Sensor sensitivity: 10...200 kΩ
- Dimensions: 160 x 80 x 60 mm
- Weight incl. power cord: 620 g
- Working temperature: -15...+ 40 ºC
- Mounting material: included
- Safety class: IP20
- Manual: Dui+Eng
- Approval mark: CE
*) Delivery includes water sensor with 10 m or 30 m cable + associated plastic mounting bracket or a stainless steel or plastic float with mounting bracket.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.
