Level controller MIN-MAX | WPS3000+ Level controller MIN-MAX | WPS3000+ Level controller MIN-MAX | WPS3000+
Level controller MIN-MAX | WPS3000+ Level controller MIN-MAX | WPS3000+ Level controller MIN-MAX | WPS3000+
Level controller MIN-MAX | WPS3000+
2 Reviews | Add review
Water level controller with 2 water sensors

Product number

VN2010031

€ 79,95
excl. VAT
€ 96,74
incl. VAT
Quantity: 
Order
 

Product description

The water level regulator has a 230 Volt output for directly controlling a pump,  electric valve or valve.

This electronic controller is intended for automatic control of the water level, for example in a well, basement, pond, swimming pool, aquarium or rainwater storage. The basin may be metal, plastic or concrete.

Applications

Switching 230 Volt on or off

By means of the switch on the front panel, the make contact can be changed to a break contact.

In this way it is possible to switch the mains voltage for a pump or valve ON or OFF AT THE CHOICE when the water level is reached. This level controller is therefore suitable for emptying and refilling.

Sensors bepalen schakelniveaus

The positions of both watersensors determine the switching points of the water level control.

Attaching the sensors can be done with screws, ty-reps or a piece of wire. The electrodes (metal contacts) of the sensors must not come into contact with metal.

Tips: 1) first determine the optimal switching points (level OFF and level ON), before permanently mounting the sensors, 2) do not screw on sensors too tightly.

The case of the level controller is not suitable for outdoor installation. The connection cable of the probes may be extended up to 30 m with RJ45 data cable.

Specifications

  • Sensor type: conduction or elevation
  • Connection voltage: 230 Volt
  • Switching power: 3,000 W
  • Power consumption: 1.5 W
  • Indicator lights: 5x LED
  • Acoustic alarm: no
  • Power cable length: approx. 1.6 m
  • Mains plug: rim-earth & pin-earth
  • Socket: safety ground
  • Sensor: 2 pieces (included)
  • Input: RJ45 connector socket
  • Dimensions: 160 x 80 x 60 mm
  • Operating temperature: -15...+ 40 ºC
  • Mounting hardware: included
  • Safety class: IP20
  • Manual: English+German
  • Quality mark: CE

Delivery: including 2x water detector sensor
option: standard or stainless steel with 10 m cable + RJ45 plug (see pictures).

*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.

Order by:

Add review
Herman Heirman - 21-03-2024 09:34

Topsysteem...werkt perfect. Geen discussie meer wanneer de vlotter van je dompelpomp aan/uit gaat. Nu beslis je zelf tot op de mm wanneer deze in/uit dienst gaat.

Rob Rotterdam - 21-11-2023 21:21

Ik heb de Niveauregelaar MIN-MAX | WPS3000+ met 2 RVS watersensoren aangeschaft om het waterniveau onder mijn souterrain vloer te kunnen regelen. Gezien de toenemende neerslag hoeveelheden wilde ik eventuele wateroverlast voorkomen. Aangezien het pand op houten palen staat kan en mag ik niet de grondwaterstand verlagen. Met deze niveauregelaar met zijn MIN en MAX sensoren kan ik dat uitstekend instellen en de pomp zorgt voor de afvoer van het overtollige regenwater.

This website uses cookies to measure visits, we do not store any personal data.
Accept selected cookies Reject cookies